Luxury Residential

Bayside, Dublin – Three-Level House Existing Drawings & Revit Model

Existing drawings and a Revit model for a three-level house in Bayside, Dublin. The homeowner’s architects needed the existing conditions measured for a feasibility study ahead of a possible planning application. The measured building survey produced a Revit model plus floor plans, elevations and sections in PDF and DWG, with a site plan.

Exterior of a two-story house with a bay window and front porch in Bayside, Dublin
Front of the Bayside house, with its bay window and porch on the ground floor.
LOCATION(S)

Bayside, Dublin

APPROXIMATE SIZE
BUILDING TYPE

Luxury Residential

SERVICES: 3D LiDAR Laser Scanning 3D Virtual Tour Architectural CAD Documentation Measured Building Survey Scan-to-BIM
DELIVERABLES: CAD Drawings Coordinated Revit Model Exterior Elevations Floor Plans Full 3D Virtual Tour PDF Drawing Set Registered Point Cloud Sections Site Plan

THE CHALLENGE

Existing Drawings for a Bayside House Feasibility Study

The architects hired by the homeowner were starting a feasibility study for this Bayside house, with a planning application possible later. Before any option could be sketched, the design team needed the house as it stands today, drawn to scale, so GeoMaus measured the existing conditions first, adding to our measured surveys across Dublin.

The house is arranged over three levels: a ground floor, a first floor and rooms in the attic. A feasibility study weighs how space can be added or reorganized, so every level had to be recorded in relation to the others, including the attic, where usable headroom shapes what the architects can propose.

Existing front elevation drawing of a house with level markers for each floor and the roof
Front elevation of the house, with floor and roof levels marked on the drawing.

SCOPE OF WORK

Measured Survey of Three Levels and the Plot

The brief covered the full house: every room on the ground and first floors, the attic, the outside walls and the plot around the building. Capturing the exterior and the site together with the interior meant the elevations and the site plan would line up with the floor plans on a shared reference.

For a feasibility study, the architects needed one dependable record to test ideas against. Floor plans and sections show what can change inside, elevations show how an extension would meet the existing walls, and the site plan shows the space available outside. Together they form the as-built documentation for the next design stage.

Existing plans for the ground floor, first floor and attic of a house beside its plot boundary
Plans of all three levels of the Bayside house, set beside the plot outline.

OUR APPROACH

Matterport Capture of Every Room in a Single Visit

In a single site visit, GeoMaus used LiDAR scanning with the Matterport Pro3 to work from the ground floor up to the first floor and into the attic before finishing outside. That capture also became a Matterport 3D tour, so the design team could walk the rooms again from their own desks.

Back at the office, the scans were joined into a single point cloud covering every level. Our modeling team built the Revit model on that point cloud and then produced the drawings from the model, so plans, sections and elevations all come from one consistent source rather than separate sets of measurements.

Section drawing through a house showing the ground floor, first floor, attic and roof
Section through the house from the ground floor to the attic and roof ridge.

THE OUTCOME

Revit Model, CAD and PDF Drawings for Feasibility Options

Delivered to the architects: the Revit model, PDF and DWG sets covering plans, sections, elevations and the site plan, the raw point cloud data from the capture, and a walk-through tour of every room. Everything arrived within six days of the survey, in time for the first round of feasibility sketches.

With the existing house modeled, the practice could test extension and layout options directly against real walls, floor levels and roof lines, and the drawings gave a basis for a planning application if the study goes ahead. The model can also carry forward through scan-to-BIM modeling into later design stages.

Isometric Revit model of a house with a rear extension and a long rear garden
Bayside Revit model, including the rear extension, garden and side passage.

RECENT WORK

Recent Case Studies

From operational hotels and distribution centres to commercial portfolios and industrial facilities, explore how GeoMaus has helped clients create accurate building documentation while maintaining clear communication, dependable delivery and minimal disruption to operations.
Malibu, CA – Single-Story Home Scan-to-BIM & Reflected Ceiling Plans

Scan-to-BIM and reflected ceiling plans for a single-story home in Malibu, CA. The project team needed the house recorded as it stands before design work began. GeoMaus delivered floor plans, ceiling plans, sections, exterior and interior elevations and a Revit model from a measured building survey, issued in PDF and DWG.

East Hampton, NY – 1,946 sq. ft. Home Existing Conditions Survey & Revit As-Builts

Existing conditions survey and Revit as-builts for a 1,946 sq. ft. home in East Hampton, NY. A design firm needed the house measured ahead of renovation design. The GeoMaus measured building survey produced a Revit model, DWG and PDF drawings with floor plans, reflected ceiling plans, elevations and sections, plus point cloud data and a tour.

Boston, MA – 22,979 Sq. Ft. Three-Level Restaurant As-Built Drawings & BIM

As-built drawings and a Revit model for a 22,979 sq. ft. three-level restaurant in Boston, MA. The building holds dining rooms on every floor, three bars including a raw bar, four kitchens, and outdoor decks. GeoMaus delivered Imperial and metric Revit models, ten CAD and PDF sheets, a 3D DWG, and the point cloud.

Belvidere, IL – 150,000 Sq. Ft. Warehouse Scan-to-BIM Survey

3D laser scanning and scan-to-BIM survey of a 150,000 sq ft industrial warehouse in Belvidere, IL, capturing full existing conditions including structural steel positions for a redevelopment project. Completed on site with no building power, mould-affected areas, and a two-day access window, delivered as CAD, Revit, and a full 3D virtual tour that saved the project team thousands of hours in RFIs.

REQUEST A FREE QUOTE

Tell Michael About Your Project

Most enquiries get a same-day reply from Michael directly. If your project isn’t a fit for us, he’ll tell you on the call and point you somewhere better.

No sales calls, no automated drip sequences. Michael replies personally to every enquiry usually within a few hours.